Xbox 360 Controller for PC (Most Updated Guide)

Xbox 360 Controller

Xbox 360 Controller for PC: Remember those awesome days when we used to play Contra or Mario? Well with technological advancement those games have become primitive and have been replaced by the likes of FIFA, COD, DOTA or Assassin’s Creed. But one thing remain constant; the consoles.

Yes certainly the consoles have been upgraded too, they also witnessed and get them modified with the technological revolution, but the essence of a gaming console still kept intact. And when we are talking about a gaming console, the first name strike into your subconscious mind is the Xbox and in this article we will talk about how to run Xbox Controller for PC or run Xbox 360 Controller for PC.

Xbox 360 Controller for PC

                                                                                     Xbox 360 Controller

Developed by Microsoft, The Xbox is a home video game console launched in 2001. The Xbox 360 is the successor to the original Xbox and is the second console of the same series. The Xbox 360 was officially unveiled in 2005 and the earliest versions of the console suffered from a high failure rate. But later, the maker of the Xbox 360, Microsoft redesigned the console and launched two new upgraded models of the console; the Xbox 360 S and Xbox E and since then there was no looking back for this gaming console. As of today, more than 100 million Xbox 360 controllers have been sold worldwide and thus make it the sixth-highest-selling video game console in history, and the highest-selling console made by an American company.

Can’t Miss: KIK for PC free Download

Now the question is why would we use a gaming console when we could serve the same purpose by the keyboard? Well the biggest advantage Xbox 360 possesses is; most of the modern games now-a-days comes only controller compatible. You can’t play those games on your PC with a keyboard unless you use Xbox Controller for PC or run Xbox 360 Controller for PC. Also being multi-featured, most of the modern day video games demand the players to use loads of keys, which is very difficult to successfully implicate while you are playing on a keyboard. The simple, minimal but multi-functioning keys of the Xbox make it easier and not only that; it enhances the game-playing experiences of the users too. Xbox 360 features motion sensing and vibration sensors which help the players to relate with the game and the game’s characters. So take a look at the biggest advantages of using Xbox Controller for PC:

Features of Xbox 360 Controller for PC

  • The most highlighting feature of Xbox 360 is; this is a video game console and you can play each and every game released for Xbox.
  • Apart from that, the Xbox 360 comes with an online service, Xbox Live, which was expanded from its previous version on the original Xbox and receives regular updates during the console’s lifetime.
  • Xbox Live is available in free and subscription-based varieties and allows its users to play games online; download games (through Xbox Live Arcade) and the game demos too.
  • Not only that, you can purchase and stream music, television programs, and films through the Xbox Music and Xbox Video portals.
  • Users can also access third-party content services through media streaming applications.
  • Apart from the online multimedia features, the Xbox 360 facilitates its users to stream media from local PCs.
  • To help the Xbox brand grow from gaming-only consoles to encompassing all multimedia, multiple peripherals have been released, including wireless controllers, expanded hard drive storage, and the Kinect motion sensing camera.
  • The Xbox 360 houses an Ethernet networking port that lets the users to connect their console to a home network for online gaming and for media purposes.
  • The Xbox controller comes with 3 USB ports which let the users to connect devices such as an iPod, a Sony PSP or even a digital camera.

So friends, see there are plenty of advantages to run Xbox controller for PC. Now let find out what are the steps to use Xbox 360 controller for PC. We have described all the necessary steps and the entire with very easy and simple steps and with appropriate screen shots; so that you don’t face any kind trouble while going through the steps. It is very easy to run the Xbox controller on Windows or Mac PC. Just follow the below given steps and you are all set to play all the high-intensity, nerve-wrenching and thrilling Xbox games from your desktop or laptop. But before getting into the in-depth steps, let check out the minimum system requirements you need to have to run the Xbox Controller for PC successfully:

Xbox 360 Controller for PC: Minimum System Requirements 

To run Xbox 360 gaming console successfully on your desktop or laptop, your PC has to have an available USB port and should run on Windows XP Service Pack 2 or later. Apart from that you need a HD monitor, minimum 4GB of RAM and at least 2 GB graphics card. The more the RAM and the graphics card will be the better and smoother the games will run on your computer.

Hot Topic: FaceTime for Windows PC

Run Xbox 360 Controller for Windows PC (8.1/8/7/XP)

Generally Xbox consoles are of two types, one is wired controller and the other one is wireless. We have described both the methods, for the wired controller and the wireless controllers. So depending upon you requirements you select the method you need and follow the below mentioned steps to run Xbox 360 controller for Windows PC.

Set up a Wired Controller

Step 1: Ok, in the first step all you have to do is to install your Xbox 360 Controller for the Windows software. Although a standard Xbox 360 wired controller can easily be attached or connected to a Windows PC by the virtue of an USB port, but the drivers must be installed before the controller will work.

So to, install the drivers, you have to use the installation CD that comes with your Xbox 360 gaming console before you connect the controller to your computer. The steps are as followed:

  • Insert the installation CD in your CD or DVD drive of the computer. If the setup program doesn’t start automatically, go to your CD or DVD drive and run the setup program.
  • After that, on the setup screen, click the Install button.
  • Now the Xbox 360 Accessories setup program will start installing the necessary files to your computer.
  • As soon as the installation completes, you will be asked to restart your computer.

Also remember, if you don’t have an installation CD for your Xbox 360 Controller for Windows PC, you can download and install the software online too. So to download and install the software from online follow the below given instructions:

  • Visit the Software Downloads section of the Microsoft Hardware website.
  • Then, choose Gaming as the product type.
  • After that, choose Xbox 360 Controller for Windows as the product.
  • Now select the version of the Windows you are using on your computer and choose your operating system language too, and then click Download.
  • After that, click on the Run button.
  • Now, the Xbox 360 Accessories setup program will start installing the necessary files to your computer.
  • As soon as the installation process completes, you will be prompted to restart your computer.

Step 2: Now in the second step, you need to connect the Xbox 360 wired controller to your computer. So as soon as you finishes installing the software, plug your Xbox 360 wired controller’s USB connector into a USB 2.0 port on your computer.

Step 3: In the third step of the procedure, you need to test the controller whether it has installed and connected properly or not. So to test your Xbox 360 wired controller on your PC, follow these steps:

  • Go to the left bottom hand side of your computer screen and click Start.
  • Now, type Run.
  • After that, type joy.cpl, and then press ENTER.
  • Now choose Xbox 360 Controller, and then click Properties.
  • Now to test your Xbox 360 wired controller press a button, pull a trigger, or move a stick on the controller. If your Xbox is functioning correctly, you’ll see the corresponding action light up in the application. If your computer doesn’t recognize your controller, visit to the Troubleshoot your Xbox 360 controller for PC running on Windows OS for expert opinions.

Set up a Wireless Controller

In general, a standard Xbox 360 wireless controller can easily be connected to any Windows PC whatsoever, but for that you must have an Xbox 360 Wireless Gaming Receiver to play games, even if you have the proud possession of an Xbox 360 Play & Charge Kit. So to set up a Wireless Xbox 360 controller for Windows PC you need to connect the controller to your PC first. Don’t worry, just follow the below mentioned steps and you are good to run Xbox 360 controller for PC.

Step 1: How to connect the Xbox 360 Wireless Gaming Receiver to your PC

  • First of all remove the green label attached on the wireless gaming receiver.
  • Then insert the gaming receiver’s USB connector right into a dedicatedly powered USB 2.0 port on the computer (either on the front side or on the back of your computer).
  • Now you will notice a green light on the receiver which indicates that the unit is working properly
  • After that, if you can see the “Add New Hardware Wizard” kickstarts on your own readily, select Install the software automatically (Recommended), and then click on the Next button.
  • Now if the wizard installs the software successfully, click on the Finish button and then skip to the Step 3: Connect the Xbox 360 wireless controller to your computer below.
  • Else, if the wizard fails to install the software, continue to Step 2.

Step 2: How to install the Xbox gaming receiver software

You can install the software from the installation CD which came with your Xbox 360 Wireless Gaming Receiver. If you don’t have the CD, you can still install the required software by downloading it with ease via online.

To install the software from a disc:

  • Insert the installation CD in your CD or DVD drive of the computer. If the setup program doesn’t start automatically, go to your CD or DVD drive and run the setup program.
  • After that, on the setup screen, click the Install button.
  • Now the Xbox 360 Accessories setup program will start installing the necessary files to your computer.
  • As soon as the installation completes, you will be asked to restart your computer.

To install the software by downloading it online:

  • Visit the Software Downloads section of the Microsoft Hardware website.
  • Then, choose Gaming as the product type.
  • After that, choose Xbox 360 Controller for Windows as the product.
  • Now select the version of the Windows OS that you are actively using on your computer and choose your operating system language too, and then click Download.
  • After that, click on the Run button.
  • Now, the Xbox 360 Accessories setup program will start installing the necessary files to your computer.
  • As soon as the installation completes, you will be asked to restart your computer.

Step 3: How to connect the Xbox 360 wireless controller to your computer

  • First thing first, turn on the Xbox 360 wireless controller by pressing and holding the Guide button, the larger circular button located right in the exact middle of the controller near the top.

Xbox Controller for Windows PC

  • Now, on the receiver, press the connect button which looks like a circular button and placed near the middle of the receiver. You will notice that the light will flash green.

Xbox 360 controller for PC

  • After that, hit the connect button on the controller, which is a small circular button placed on the front edge of the controller as you hold it in your hands.

Xbox Controller for PC

  • Both the green flashing lights on the controller and on the receiver indicates that the device is trying to establish a connection. When the light stops flashing and remains lit, that means your controller is connected. (On the wireless controller, one of the lights around the Guide button will remain lit.) If you still can’t connect, visit to the “Troubleshoot your Xbox 360 controller for Windows PC.”

Xbox Controller for Windows PC

Read it Right Now: GarageBand for PC Download

How to Run Xbox 360 Controller for Mac PC

We have already discussed about how to connect Xbox 360 controller for Windows PC but if you use a Mac PC and if you want to run Xbox 360 controller for Mac PC, what should you? Well we have also explained that solution too in this tutorial. So check it out below:

  • First and foremost thing, you’ll need an Xbox controller, wired or wireless with the Microsoft wireless adapter.
  • Now, to make the controller working properly you will need to pick up a driver and for that visit to the TattieBogle, and download the driver for OS X there. This driver will allow your Mac PC to talk to the Xbox 360 controller, and vice versa.
  • After you have downloaded the driver, mount the disk image with a perfect double click exactly on the .dmg file and then another double click right on the .pkg file that’s on it.
  • Now, to install the driver software just follow the instructions coming on your computer screen, just like any other OS X installer. Remember in this case you don’t need to restart your Mac PC.
  • After that, plug in the Xbox 360 wired controller.
  • Then you will notice the green lights around the middle buttons of the Xbox will lit up, but will go dark almost immediately. Unlike when connected to an actual Xbox 360, the controller will not lit for constantly when it is connected to your Mac PC.
  • After that, pull up the System Preferences pane, either from the Apple Menu or from within your Applications folder.
  • Now you should find an Xbox 360 Controllers preference icon in the lower right.

Xbox 360 Controller for Mac

  • Click on that, and you’ll notice a control panel like the above screenshot.
  • Finally to check whether the controller is working properly or not; press the buttons which will darken them on the control panel, so that means the controller is working perfectly.

Xbox 360 Controller for Mac PC

If you find out that the controller is not supporting then you can try out some apps like Joystick Mapper or Gamepad Companion. You can download these apps from the Mac App Store and the purpose of these apps is to configure your controller to act as a keyboard and mouse. Joystick Mapper will cost around $4.99 and Gamepad Companion around $7.99.

Most Popular: Clash Royale for PC

How to Set Up Xbox 360 Controller for Windows 10

Folks we already have guided you about How to Run Xbox 360 Controller for Windows (8.1/8/7/XP) and Mac PC but if you are using the latest Windows 10 OS on your system and wish to set up Xbox 360 controller for Windows 10 then simply follow the aforementioned process we have discussed for the Windows 8.1/8/7/XP version. This process is exactly same for every Windows version and the easiest too.

Xbox 360 Controller for PC: Best Alternatives

Though Xbox Controllers are one of the best gaming consoles available in the market today but you can try your hands on other controllers too. If we talk about the Xbox 360 Controllers best alternatives the first two name strikes to our mind is Sony’s PlayStation and Nintendo gaming consoles. So you can definitely try these two video game consoles if you get bored of the Xbox 360 controller for PC.

Wrap Up

Hopefully this article has guided you properly to set up Xbox 360 Controller for PC. Follow these easy and simple steps and make your life more fun-filled and cheerful. If you have any query regarding the steps we explained above, you can post your questions on our comments section. We promise a prompt reply will await for you. Thank you.

Be the first to comment on "Xbox 360 Controller for PC (Most Updated Guide)"

Leave a comment

Your email address will not be published.


*